Hardware Description - OPENTEL ODT 4000V User Manual

4. C. REMOTE CONTROL UNIT
1) POWER : This is used to switch the receiver to ON/STANDBY mode.
2) MUTE : This key is used to toggle between normal and muted audio.
3) 0-9 NUMERIC KEYS : These keys are used to enter numeric values and
to select the channel directly by entering its number.
4) CH▲·CH▼ : These keys are used to change channels and to browse the
menu.
5) VOL ▶ ▶ ▶ ▶ ·VOL ◀ ◀ ◀ ◀ : These keys are used to vary the volume level and to
change the cursor options in the menu.
6) MENU : This key is used to open up the menu.
7) EXIT : This key is used to exit from any menus.
8) OK : This key is used to enter and confirm any data to the receiver in the
menu systems. The Channel list can be accessed directly by pressing this key
in the normal view mode.
9) Page Up : This key is used to page up the menu.
10) Page Down : This key is used to page down the menu.
11) FAV : This key is used to switch between favorite lists.
12) GUIDE : This key is used to open up the Electronic Program Guide.
13) i : This key is used to view the channel information.
14) ♬ : This key is used to toggle between the TV channel and the radio
channel.
8

HARDWARE DESCRIPTION

15) LAST : This key is used to return to the previous channel.
16) AUDIO : This key is used to select the soundtrack list for the current service
and also used to select audio mode.
17) PAUSE : This key is used to pause the screen.
18) F1, F2, F3, F4 : Function Keys.
19) TEXT : This key is for Teletext.
9
HARDWARE DESCRIPTION