Table of Contents
Advertisement
remote start
This feature is only available with IntelliStart connected
The transmitter channel programmed into this feature will
activate or shut down the Intellistart remote start system.
window control
This feature is only available with SmartWindows connected
The transmitter channel programmed into this feature will
activate the vent or roll down feature of the SmartWindows
system.
accessory c output
The transmitter channel programmed into this feature will activate the
accessory output.
clear all remotes
This feature will erase all remote codes from the system
memory. This feature is convenient for erasing any transmit-
ters that have been lost, stolen, or incorrectly programmed
into the system.
After entering this feature press any button on the transmit-
ter; the siren will chirp to indicate that all transmitters have
been erased from memory.
© 2 0 0 3 d i re c t e d e l e c t ro n i c s , i n c .
29
Advertisement
Table of Contents
