Installation of Software
Note
If your operating system is configured so that the installation procedure ac-
cepts only signed drivers (default) and software an information screen will
appear.
The software included in delivery is already pre-installed in the factory.
Attention!
You may find that during the installation procedure important files may be
changed or even cancelled. To avoid further problems in using older files af-
ter an installation, make sure you safeguard your hard disk. See page 59 for
further information regarding data backup.
How to Install your Software
Please follow the instruction of the software vendor. We will describe a typical installation.
Once you insert a CD, the installation menu is started automatically.
Note
If the automatic start does not work, it is likely that the so-called Autorun
function has been deactivated. Read the respective chapter in Windows
Help on how to activate this function.
An example for the manual installation without the autorun function:
1. Click on Start
2. Click on All Programs.
3. Open the
4. Select the item
5. Now enter the letter of the CD-ROM drive followed by a colon and the program
name setup:
- 52 -
.
Accessories program point.
Run.
(costs 7p/min from a BT landline, mobiles costs may be higher)
UK/ N. IRELAND HELPLINE 0871 3761020
REP. IRELAND HELPLINE 1-800-992508