Maintenance & Troubleshooting; Replacing The Battery; Routine Maintenance; Replacement Parts - General DT80-1 User Manual

• Input protection: Maximum 24V DC or AC
• Battery: 1 "9V" (NEDA 1604, IEC 6F22)
• Battery life: Approximately 200 hours
• Weight: 6 oz. (170g)
• Dimensions: 5.12(L) x 2.2(W) x 1.50(H) in. (130(L) x
56(W) x 38(H) mm)
• Auto power off: after 15 minutes of no activity
MAINTENANCE &
TROUBLESHOOTING

REPLACING THE BATTERY

If the icon appears on the display, turn off the
instrument and replace the battery immediately.

ROUTINE MAINTENANCE

The DT80-1 and DT80-2 require no maintenance other
than periodic cleaning. To clean the instrument, use a soft
dry cloth. Never use a wet cloth, solvents or water.

REPLACEMENT PARTS

The DT80-1 ships with a carrying case and one general-
purpose K-type thermocouple probe with a beaded tip
General P/N TPK500. The DT80-2 ships with two of these
probes. To order additional probes of this type, or other
specialty thermocouple probes, refer to page I-38 of
General's Full Line or Professional Test Instruments
catalogs or visit www generaltools com.
11