Page 1
DELUXE FAST RESPONSE WATERPROOF DIGITAL STEM THERMOMETER USER’S MANUAL DWS350SSQ Please read this manual carefully and thoroughly before using this product.
• Fast response • Plastic sheath with metal pocket clip • One button calibration WHAT’S IN THE BOX The DWS350SSQ comes in a white box along with this user’s manual. An “LR44” button battery is preinstalled in the battery compartment. OPERATING INSTRUCTIONS To begin, carefully remove and discard the clear plastic film protecting the entire oval control panel.
Page 3
At the factory, the DWS350SSQ was set to display temperature in °C. To switch to °F, press the °C/°F button. The thermometer will “remember” your last selection when it powers off and will resume using that unit upon restart. So if you always use the same unit, you will never have to press the °C/°F button...
MIN/MAX memory. Resetting the MIN/MAX memory clears both values; you cannot independently reset one stored value but not the other. To calibrate the DWS350SSQ: 1. Power on the unit. 2. Insert the probe into a cup containing a slurry of crushed ice and water at least 1 in.
Subject to certain restrictions, General will repair or replace this instrument if, after examination, the company determines it to be defective in material or workmanship.
This limited warranty does not apply to damages that General determines to be from an attempted repair by non-authorized personnel or misuse, alterations, normal wear and tear, or accidental damage. The defective unit must be returned to General Tools & Instruments or to a General- authorized service center, freight prepaid and insured.
Need help?
Do you have a question about the DWS350SSQ and is the answer not in the manual?
Questions and answers