Bluetooth - Yamaha YSP-2500 Owner's Manual

Bluetooth

Problem
Cannot make the unit paired with Bluetooth is not selected as the input source.
the Bluetooth device.
The device does not support A2DP.
A Bluetooth adaptor, etc. that you want to pair with the unit has a password
other than "0000".
The unit and device are too far apart.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
Another Bluetooth device is connected.
Cannot make a Bluetooth Another Bluetooth device is connected.
connection.
More than nine devices are paired and the oldest pairing information is
deleted.
No sound is produced or the The Bluetooth connection of the unit with the device is disconnected.
sound is intermittent during
The unit and device are too far apart.
playback.
There is a device (microwave oven, wireless LAN, etc.) outputs signals in
the 2.4 GHz frequency band nearby.
The device's Bluetooth function is off.
The device is not set to send Bluetooth audio signals to the unit.
Playback on the device has not been performed.
The device's volume is set to minimum.
Cause
Select Bluetooth as the input source.
Perform paring operations with a device which supports A2DP.
Use a Bluetooth adaptor, etc. whose password is "0000".
Position the Bluetooth device so that it is less than 10 m (33 ft) from this unit
and pair the device with this unit.
Move this unit away from the device that is emitting radio frequency signals.
Terminate current Bluetooth connection, and perform pairing with the new
device.
The unit cannot make multiple Bluetooth connections. Terminate current
Bluetooth connection, and make connection for the desired device.
Perform pairing again. The unit can retain pairing information for up to eight
devices. When pairing a ninth device, the oldest pairing information will be
deleted.
Perform Bluetooth connection operations again.
Move the Bluetooth device so that it is less than 10 m (33 ft) from this unit.
Move this unit away from the device that is emitting radio frequency signals.
Enable the Bluetooth function of the device.
Check that the Bluetooth function of the device is set properly.
Perform playback on the device.
Turn up the volume level on the device.
Remedy
TROUBLESHOOTING ➤ Troubleshooting
See page
39
78
48
49
–
49
49
48
49
49
–
–
–
–
–
71
En