Related Manuals for AXIOMTEK GOT-3100T
Summary of Contents for AXIOMTEK GOT-3100T
- Page 1 GOT-3100T/3100TL/3108T All-in-One 10.4” TFT SVGA Fanless Touch Panel Computer User’s Manual...
- Page 2 AXIOMTEK assumes no responsibility for any inaccuracies that may be contained in this document. AXIOMTEK makes no commitment to update or to keep current the information contained in this manual. AXIOMTEK reserves the right to make improvements to this document and/or product at any time and without notice.
-
Page 3: Safety Approvals
Safety Approvals CE Marking FCC Class A FCC Compliance This equipment has been tested and complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 4: Safety Precautions
Safety Precautions Before getting started, read the following important cautions. 1. The GOT-3100T/3100TL/3108T does not come equipped with an operating system. An operating system must be loaded first before installing any software into the computer. 2. Be sure to ground yourself to prevent static charge when installing the internal components. - Page 5 Trademarks Acknowledgments AXIOMTEK is a trademark of AXIOMTEK Co., Ltd. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation. Intel and Pentium are trademarks of Intel Corporation. MS-DOS, Microsoft C and QuickBASIC are trademarks of Microsoft Corporation.
- Page 6 This page does not contain any information.
-
Page 7: Table Of Contents
Table of Contents Disclaimers................ii Safety Approvals..............iii Safety Precautions ............. iv C h a p t e r 1 ..............1 Introduction ................1 1.1 General Description ..........1 1.2 Specifications ............2 1.2.1 Main CPU Board ............2 1.2.2 I/O System ............... 2 1.2.3 System Specification .......... - Page 8 3.1.1 Driver Installation- Windows 2000/XP ....19 3.2 Embedded O.S............22 3.2.1 Windows XP Embedded.......... 22 3.2.2 Windows CE.NET 5.0 ..........22 viii Table of Contents...
-
Page 9: Chapter 1
General Description I/O Outlets System Specification Utilities Supported Dimensions Package List General Description The GOT-3100T/3100TL/3108T is a fan-less and compact-size touch panel computer, and is equipped with a 10.4" TFT LCD display and power consumption CPU, Celeron 1GHz/0K. GOT-3100T/3100TL/3108T supports Windows® 2000/XP, Windows®... -
Page 10: Specifications
GOT-3100T/3100TL/3108T supports 2.5" HDD or CompactFlash™ card. Industrial-grade Product Design The GOT-3100T/3100TL/3108T has an incredible design that can be used in different industrial harsh environments. A fuse helps prevent over-voltage for power input. Stainless steel back chassis and Aluminum front bezel meets the IP65/NEMA4 standard. -
Page 11: System Specification
GOT-3100T/3100TL/3108TT User’s Manual Ethernet: - RJ45 x1 Expansion Slot: MiniPCI for wireless module Audio 1.2.3 System Specification 10.4” TFT LCD Heat dispensing design Net weight: − 4.1 Kg Dimension (main body size): − 290x71.9x248mm Operating temperature: O° to 45°C ; Relative umidity:40% Relative humidity: 10% to 90% @ 40°... -
Page 12: Dimensions
GOT-3100T/3100TL/3108T User’s Manual Dimensions The following diagrams show the dimensions and outlines of GOT-3100T/3100TL/3108T... -
Page 13: I/O Outlets
GOT-3100T/3100TL/3108TT User’s Manual I/O Outlets The following figure shows the I/O locations of the GOT-3100T/3100TL/3108T. Most of the I/O connectors are located on the back panel of the GOT-3100T/3100TL/3108T Power connector USB v2.0 * 2 Audio PS2 keyboard/mouse COM4 Ethernet (RJ45) -
Page 14: Package List
GOT-3100T/3100TL/3108T User’s Manual Package List When you receive the GOT-3100T/3100TL/3108T there are following items in the package. If you can not find it, please contact AXIOMTEK distributors. 1. GOT-3100T/3100TL/3108T x 1 2. Panel mount kit x 6 3. CD driver x1 4. -
Page 15: Chapter 2
GOT-3100T/3100TL/3108TT User’s Manual C h a p t e r Hardware Installation The GOT-3100T/3100TL/3108T provides lots of flexible ways for you to select different configuration such as HDD,(recommend wide temperature HDD) CF card and more. The chapter will show you how to install the hardware. - Page 16 GOT-3100T/3100TL/3108T User’s Manual 3. Fix the HDD kit to system by 4 screws.
-
Page 17: Cf Card Installation
GOT-3100T/3100TL/3108TT User’s Manual CF card Installation The GOT-3100T/3100TL/3108T offers a slot for users to install CF card. When installing the CF card, refer to the following instructions and illustration: 1. Open the back cover. Find SBC84810 and turn to back side. -
Page 18: Wireless Card Installation
GOT-3100T/3100TL/3108T User’s Manual Wireless Card Installation The GOT-3100T/3100TL/3108T provides one miniPCI slot for user to install one wireless card. When installing the wireless card, refer to the following instructions and illustration: 1. Open the back cover and find SBC84810 and AX93200... - Page 19 GOT-3100T/3100TL/3108TT User’s Manual 3. Connect cable from antenna to wireless card..
-
Page 20: Serial Ports
GOT-3100T/3100TL/3108T User’s Manual 3 x Serial Ports The connector, COM 1, is a DB-9 connector, and the following table shows the pin assignments of this connector. COM1 Port Connectors Signal Name DCD, Data carrier detect RXD, Receive data COM1 TXD, Transmit data... - Page 21 GOT-3100T/3100TL/3108TT User’s Manual The RS-422/485 pin assignments for COM2 are listed below. Signal Name Pin # R2-422 RS-485 DATA- No connector No connector DATA+ No connector No connector No connector No connector No connector No connector No connector No connector...
-
Page 22: Vga
CRT simultaneously. Ethernet Ethernet RJ-45 Connector: LAN1 The GOT-3100T/3100TL/3108T is equipped with a high performance Plug and Play Ethernet interface which is fully compliant with the IEEE 802.3 standard, and consisting of a RJ-45 connector LAN 4.15.1 Pin Assignment... -
Page 23: Mountings: Panel / Wall / Desktop / Vesa
GOT-3100T/3100TL/3108TT User’s Manual 2.7 Mountings: Panel / Wall / Desktop / VESA There are 4 application options for the GOT-3100T/3100TL/3108T, Panel/Wall/Desktop/VESA mountings. 2.7.1 VESA-ARM/Wall-Mount The GOT-3100T/3100TL/3108T provides two ways for VESA mount: 75x75 mm./100x100mm Screw four screws to fix the kit (optional) in the side chassis. -
Page 24: Desktop Kit Assembly
GOT-3100T/3100TL/3108T User’s Manual 2.7.2 Desktop Kit Assembly The GOT-3100T/3100TL/3108T is designed for desktop application. Screw 4 screws to fix the kit (optional) in the side chassis. -
Page 25: Panel-Mount Kit Assembly
GOT-3100T/3100TL/3108TT User’s Manual 2.7.3 Panel-mount Kit Assembly The GOT-3100T/3100TL/3108T is designed for panel mount application. To mount the GOT-3100T/3100TL/3108T, the standard set of mounting kit (included in the system packaging) is needed. -
Page 26: Chapter 3
GOT-3100T/3100TL/3108 could support with Windows 2000/XP. To facilitate installation system driver, you should read the instructions in this chapter carefully before you attempt installation. Insert Driver CD and select the “\GOT-3100T series\Driver\”. Select all files and follow the install procedure. 3.1 Touch Screen... -
Page 27: Driver Installation- Windows 2000/Xp
-10℃ ~ 60℃ Humidity less than 85% RH Operating Temperature: 3.1.1 Driver Installation- Windows 2000/XP The touch screen of GOT-3100T/3100TL/3108T provides a driver for use with Windows 2000/XP. To facilitate installation of the touch screen driver, you should read the instructions in this chapter carefully before you attempt installation. - Page 28 GOT-3100T/3100TL/3108T User’s Manual Follow the install procedure and press OK. Click Start menu and select “PenMount Utilities”. You can see PenMount Control Panel Select the “Standard Calibrate” tab...
- Page 29 GOT-3100T/3100TL/3108TT User’s Manual Calibration: To adjust the display with touch panel, click “Calibration” and follow the calibrate point to do calibration; there are five points on screen for calibration. Press OK.
-
Page 30: Embedded O.s
Onboard audio Audio Touch Screen PenMount Touch screen GOT-3100T/3100TL/3108T has Penmount touch screen on COM3, which is disabled by default. Before you can use and calibrate it, you should : 1. Set up Penmount touch device driver by executing c:\Penmount\ Windows 2000-XP V5.0\setup.exe. When installation finished, an icon “PM”... - Page 31 GOT-3100T/3100TL/3108TT User’s Manual IrDA for wireless communication Onboard IDE IDE HDD PS2 Keyboard and mouse CRT/LCD display 10/100 base-T Ethernet Compact flash Onboard audio Audio Touch Screen Calibration Touch Screen In this image we add PenMount Touch drivers and utilities. It is customized for 800 x 600.
Need help?
Do you have a question about the GOT-3100T and is the answer not in the manual?
Questions and answers