Table of Contents
Advertisement
8. Select "I/O Range" under the Resource Settings then click the
"Change Settings" button.
9. Select the "Value" that matches the DIP switch settings used for the
adapter card and note any conflicts that appear. Accept the settings
and reboot the computer.
10. If a conflict is not reported in Device Manager, then the port should
be ready for use. Otherwise contact the system or motherboard
manufacturer for a possible work around.
Windows 7/Server 2008 R2
1. Access the Device Manager by right-clicking on My Computer
and selecting the "Manage" option. In the Computer Management
window, select Device Manager from the left window panel.
6
Advertisement
Table of Contents
Need help?
Do you have a question about the PCI1PM and is the answer not in the manual?