Standard Plug-And-Play Mode - StarTech.com PCI1PM Instruction Manual

8. Select the "Value" that matches the DIP switch settings used for the
adapter card and note any conflicts that appear. Accept the settings
and reboot the computer.
9. If a conflict is not reported in Device Manager, then the port should
be ready for use. Otherwise contact the system or motherboard
manufacturer for a possible work around.

Standard Plug-and-Play Mode

Windows 2000/XP/Server 2003
1. When the Found New Hardware wizard appears on the screen,
insert the Driver CD into your CD/DVD drive. If you are prompted
to connect to Windows Update, please select the "No, not this time"
option and click Next.
2. Select the option "Install Drivers Automatically (Recommended)" and
then click the Next button.
3. Windows should now start searching for the drivers. Once this has
completed, click the Finish button.
Windows Vista/7/Server 2008 R2
1. When the Found New Hardware window appears on the screen,
click on the "Locate and install drivers software (recommended)"
option. If prompted to search online, select the "Don't search online"
option.
9