Specifications - Panasonic AG-MYA30G Operating Instructions Manual

I
0+4BV switch
When the switch is set to the ON
position, +48V power (power supply for
a phantom microphone) is supplied to
the corresponding XLR connector
(INPUT1 or INPUT2).
When connecting a unit that is not
compatible with the +48V power, set
the switch to the OFF position.
Connecting a
non~compatible
unit
when the switch is set to the ON
position may cause the unit to
malfunction.
0CH SELECT switch
Use this switch to select the audio
track on which to record the audio
sign,als that are supplied from the unit
connected to the INPUT2 connector.
• Correlation between CH SELECT switch positions and input signals which are
recorded on the audio tracks
CH SELECT switch
Recorded audio tracks
position
CH1
I
CH2
CH1'2
Signals from INPUT2 connector
CH2 Signals from INPUT1 connector
I
Signals from INPUT2 connector
• Adjusting the input level
Use the level controls
0
and An switch
0
to adjust the audio input level.
Adjust the level to suit the recording conditions.
Specifications
Ambient operating temperature:
O°C to +40°C (32°F to 104°F)
Ambient operating humidity:
10% to 85% (no condensation)
Weight:
185 g (OA07Ib)
Excluding microphone holder
Dimensions (WxHxD):
69.6 mmx36.6 mmx75 mm
(2 3 /4 inches x 1 1 /2 inchesx3 inches)
Excluding microphone holder
XLR connector (INPUT1, INPUT2):
XLR (3 pins) x2 (CH1, CH2)
LINE/MIG sWitching, high impedance
LINE: 0 dBu
MIC : -50 dBu/-60 dBu (selling selected using
An
switch)
E-8