Mount the metal fitting on the handle provided with the AG-DVC30 (or AG-DVC32)
using the 6 mrn long flush-head screws.
flush head screws
Install the handle on the AG-DVC30
Remove the connector cover of the
AG-DVC30 (or AG-DVC32), and pull it
out in the direction indicated
Insert the shoe of the adapter into the
metal fitting, and secure the adapter
tightening the anchoring screws.
Attach the connector cover supplied
with the adapter to the AG-DVC30 (or
that the connectors are
• Attach the connector cover
a thin round-tipped implement to
push it into place.
When doing this, take care not to
damage the AG-DVC30 (or AG-
Connect the adapter's cable to the
XLR ADAPTER connector on the AG-
DVC30 (or AG-DVC32).