Natural Gas Models; Propane Models - Schwank 4001-J SERIES Installation & Owner's Manual

4. MAIN COMPONENTS AND TOOLS REQUIRED FOR ASSEMBLY
Tools Needed:
Adjustable Wrench, Slip Joint Pliers, Phillips Screwdriver,
Medium Blade (#2 or #3 blade), Spray Bottle of Soapy
Water or Paint Brush and soapy water (to check leaks)
Parts Supplied: 4001/2, 4N11/2 &
4401/2, 44N1/2
•
Main Burner/Head assembly unit
•
34" housing and Base
•
Post Support Brackets (3 each)
•
46" gas supply line
•
Aluminum Reflector (5 pc. Sectional)
•
4 ea. - M6 x 20mm Bolts for Burner Assembly & Upper
Post
•
6 ea. - M6 x 35mm long with M6 Nuts for Post &
Brackets
•
3 ea. - M8 x 15mm long bolts for Post Bracket to Cylinder
Base
•
12 ea.-1/4" acorn nuts for attaching reflector components.
•
12 ea.-1/4" washers for attaching reflector components.
•
12 ea.-1/4" bolts for assembling cylinder base
•
4 ea.- 10mm Phillips screws for burner to post mounting
•
3 ea- M8-125 Butterfly wing Nuts for top
•
Fold away Wheels
•
AAA Igniter Battery
Propane Models (4001/2-J & 4401/2-J)
•
LPG Regulator on hose and QCC fittings
Natural Gas Models (4N11-J, 4N12-J)
•
Sand fillable counterweight container
•
18 ft rubber gas hose c/w 1/2" male quick disconnect
•
1/2" female quick disconnect for gas supply piping
•
N.G. Regulator 5" w.c.
•
Gas hose clamp
Note: Gas Pressure Regulators are required
(see Connection and Testing)
Model 4001-J, 4N11-J & 4401-J, 44N1-J includes stainless post, cylinder housing and base.
Model 4002-J, 4N12-J & 4402-J, 44N2-J includes powder coated post, cylinder housing and base.
All other components are common for Models 4001/2-J, 4N11/2-J & 4401/2-J, 44N1/2-J.
Model 4001/2, 4N11/2 &
87 3/4"
Page 7
4401/2, 44N1/2
GP-M40J-CX-08A
4001/2-J, 4N11/2-J Manual
RD: April 2006
21"
32 3/4"
34"
R.L. 08A
KH