HP Pavilion xz200 Service Manual page 61

Component
Doors, PCMCIA
Fan
Guide, hard disk drive
Guides, optical disk
drive
Heatsink
Keyboard
Module, CPU
PCA, Audio
PCA, inverter
PCA, Modem/Mini-PCI
PCA, motherboard
2-38 Removal and Replacement
Removal Procedure
Plug-in module (page 2-5).
Hard disk drive (page 2-6).
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
SDRAM modules
(page 2-13).
Mini-PCI card (page 2-16).
Display assembly
(page 2-18).
Fan and heatsink
(page 2-22).
CPU module (page 2-25).
Top case (page 2-27).
Hinge saddles
(page 2-30).
Motherboard (page 2-32).
See page 2-22.
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Display assembly
(page 2-18).
Top case (page 2-27).
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Display assembly
(page 2-18).
Top case (page 2-27).
See page 2-22.
See page 2-11.
See page 2-25.
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
Display assembly
(page 2-18).
Top case (page 2-27).
Hinge saddle, left
(page 2-30).
See page 2-20.
See page 2-15
See page 2-32.
Additional Steps
See Figure 2-25 on page 2-35.
Remove the retaining screws, and lift the guide off of
the motherboard.
Remove the retaining screw on each guide, and lift the
guides off of the motherboard
Carefully lift the PCA off of its connector, gently pull
the audio jacks out of their openings in the bottom
case, and lift the PCA out of the notebook.
Reassembly Notes: Make sure that the audio jacks fit
through their openings in the bottom case, and the
PCA is set securely on its connector.
Technology Code IC)