Removing the Top Case
(HP Authorized Service Providers Only)
Required Equipment
•
#0 Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
•
Plug-in module (page 2-5).
•
Hard disk drive (page 2-6).
•
Keyboard cover (page 2-9).
•
Keyboard (page 2-11).
•
Display assembly (page 2-18).
3. Remove the retaining screws from the bottom of the notebook.
4. Remove the screws from just inside the hard disk drive compartment, and just inside the plug-in
module compartment.
Screws,
M2.5×6mm (2)
Screws,
M2.5x6mm (6)
Figure 2-20. Removing the Top Case Retaining Screws
Technology Code IC)
Screw,
M2×4mm
Screw,
M2.5×6mm (1)
Removal and Replacement
Screws,
M2×4mm (2)
2-27