Safety Warnings And Precautions - Saito FG-14C Owner's Operating Instruction Manual

All instructions, warranties and other collateral documents are subject to change at the sole discretion of
Horizon Hobby, Inc. For up-to-date product literature, visit horizonhobby.com and click on the support tab for
this product.
The following terms are used throughout the product literature to indicate various levels of potential harm when
operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a
little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND
a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral
damage, and serious injury OR create a high probability of superficial injury.
WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product
before operating. Failure to operate the product correctly can result in damage to the product, personal
property and cause serious injury.
This is a sophisticated hobby product. It must be operated with caution and common sense and requires some
basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury
or damage to the product or other property. This product is not intended for use by children without direct adult
supervision. Do not attempt disassembly, use with incompatible components or augment product in any way
without the approval of Horizon Hobby, Inc. This manual contains instructions for safety, operation and mainte-
nance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup
or use, in order to operate correctly and avoid damage or serious injury.
Age Recommendation: Not for children under 14 years. This is not a toy.

Safety Warnings and Precautions

This manual describes the engine and its general operating procedures. For mounting and control, see the
instruction manual for the model airplane. Some suggestions are included in this manual for mounting the engine
using the included motor mount.
For proper heat transfer, it is important to use a metal motor mount when mounting these engines in a model
aircraft.
The engine is designed for use on a model radio control airplane. If it is used for any other purpose, we cannot be
responsible for its reliability or safety.
• Always use genuine Saito parts for replacements.
• Be sure to check the propeller before each flight. If it is damaged, replace the propeller with a new one.
• If the propeller hits something while the engine is in operation, immediately stop the engine and check for
damage.
• Start the engine on a flat surface free of stones or other debris.
• When mixing fuel, or operating the engine, do so in a well-ventilated area.
2
NOTICE
Meaning of Special Language