7.
To select your entry:
To increase, tap the plus button.
To decrease, tap the minus button.
To fast change in units of 10, press and hold the plus button (to
increase) or the minus button (to decrease) until the desired entry
appears.
8.
To enter the displayed value into the system, tap (do not hold) the
GPS/WP button. The next level in the entry sequence will begin
flashing.
9.
To select and enter the minutes ( )
used in steps
7
8
.
(9) minute
10.
To select and enter the seconds ( )
used in steps
7
8
.
(10) second
(11) tenths of second
11.
To select the tenths of a second (
To increase, tap the plus button.
To decrease, tap the minus button.
GPS Mode
9
follow the same procedure
10
follow the same procedure
11
):
GPScape System
(9)
(10)
(11)
(cont'd)
83