GPS Mode
There are two methods for marking waypoints.
Basic (to select your current position)
Advanced (to input desired destinations)
Basic Waypoint Selection
To Mark Your Present Position:
(For TRX500FGA)
1.
Turn the ignition switch ON ( ).
2.
Use the GPS button to select the GPS mode (page
3.
To select a higher waypoint number ( ), press and release the plus
button ( ).
2
To select a lower waypoint number, press and release the minus
button ( ).
3
To fast scroll, press and hold the plus or minus button until the
desired waypoint number appears.
4.
Press and hold the WP button ( ) for about 2 seconds, until the
waypoint number and waypoint distance ( ) flash. Then release the
button.
(1)
(1) waypoint number
(2) plus button
(3) minus button
72
GPScape System
65
1
4
5
(5)
(3)
(4) WP button
(5) waypoint distance
).
(4)
(2)