Honda TRX500FGA Owner's Manual page 183

Differential Oil
1. Park the ATV on level ground.
2. Place an oil drain pan under the oil drain plug ( ).
3. Remove the oil filler cap ( ), drain plug and sealing washer ( ).
4. After the oil has completely drained, reinstall the drain plug with a
new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
Improper disposal of drained f luids is harmf ul to the environment.
6. Fill the differential with the recommended oil.
6.3 US oz (185 cm )
Make sure the oil level is at the lower edge of the oil filler inspection
hole ( ). 4
7. Install the oil filler cap.
FRONT
(4)
(1) oil drain plug
(2) oil filler cap
174 Servicing Your Honda
1
2
238 ).
(3) sealing washer
(4) oil filler inspection hole
3
(2)
(1) (3)