Installation - D-Link DAP-3310 User Manual

Section 2 - Installation
First, you will need to configure the DAP-3310 with a computer connected directly to the unit. The following pages explains
how to set up the DAP-3310 in order to be properly configured and then tested to work as desired.
The DAP-3310 acts as a central connection point for any device (client) that has a 802.11n or backward-compatible 802.11g
wireless network interface and is within range of the AP. Clients must use the same SSID (wireless network name) and channel
as the AP in order to connect. If wireless security is enabled on the AP, the client will need to enter a password to connect to
the AP. In Access Point mode, multiple clients can connect to the AP at the same time.
The port connection cover can be
removed using a a small amount of force
so that it pops off. It can be reattached
by snapping it back into place.
D-Link DAP-3310 User Manual

Installation

STEP 1: Connect an Ethernet Cable to the LAN (PoE) Port on the AP.
11