Configuration; Web-Based Configuration Utility - D-Link DAP-3310 User Manual

Section 3 - Configuration
This section will show you how to configure your new D-Link Wireless N Exterior Access Point using the web-based configuration
utility.
If you wish to change the default settings or optimise the
performance of the DAP-3310, you may use the web-based
configuration utility.
To access the configuration utility, open a web browser
such as Internet Explorer and enter http://192.168.0.50
Select admin and then enter your password. Leave the
password blank by default.
If you get a Page Cannot be Displayed error, please refer to
"Troubleshooting" on page 78 for assistance.
D-Link DAP-3310 User Manual

Configuration

Web-based Configuration Utility

15