1. Manuals
  2. Brands
  3. Costar Video Systems Manuals
  4. Security Camera
  5. CDC2040MIL
  6. Instruction manual

Costar Video Systems CDC2040MIL Instruction Manual

Micro dome ptz camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Instruction Manual

Indoor Version
Model No: CDC2040MIL
Model No: CDC2040MI &
CDC2040MI-1
Please read this manual thoroughly before use or installation and keep it handy for future reference.
Micro Dome
PTZ Camera
English Version
24VAC ~ 60 Hz
Costar Video Systems
2720 Commodore Drive, Suite 150
Carrolton TX 75007
Tel: 972-446-8844
Fax: 972-446-8866
Outdoor Version
CDC2040MO &
Model No:
CDC2040MO-1
Rev. M080720

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CDC2040MIL and is the answer not in the manual?

Questions and answers

Related Manuals for Costar Video Systems CDC2040MIL

Summary of Contents for Costar Video Systems CDC2040MIL

  • Page 1: Instruction Manual

    Micro Dome PTZ Camera Instruction Manual English Version 24VAC ~ 60 Hz Indoor Version Outdoor Version Model No: CDC2040MIL Model No: CDC2040MI & CDC2040MO & Model No: CDC2040MI-1 CDC2040MO-1 Costar Video Systems 2720 Commodore Drive, Suite 150 Carrolton TX 75007...
  • Page 2 THIS PAGE IS INTENTIONALLY LEFT BLANK...

  • Page 3: Warnings And Cautions

    WARNINGS AND CAUTIONS WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH VENTILATION GRILLS OR OPENINGS ON THE EQUIPMENT. CAUTION EXPLANATION OF GRAPHICAL SYMBOLS The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user the presence of non-insulated “dangerous voltage”...

  • Page 4: Fcc Compliance Statement

    FCC COMPLIANCE STATEMENT FCC INFORMATION: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS OF A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.

  • Page 5: Important Safeguards

    IMPORTANT SAFEGUARDS 1. Read these instructions before attempting installation or operation of dome device. 2. Keep these instructions for future reference. 3. Heed all warnings and adhere to electrical specifications. 4. Follow all instructions. 5. Clean only with non abrasive dry cotton cloth, lint free and approved acrylic cleaners.

  • Page 6: Table Of Contents

    Table of Contents Chapter 1 – Introduction 1.1 Performance Characteristics .......................... 7 1.2 Model Numbers ............................8 1.3 Features and Functions ..........................8 Chapter 2 – Installation and configuration 2.1 Package contents............................9 2.2 Camera shroud removal and installation......................10 2.3 Communication settings..........................

  • Page 7: Chapter 1 - Introduction

    1. Introduction The CDC2040 xxx Micro series Low to High Speed domes and a series of compatible keyboard controllers make up the building blocks for any size video surveillance system. Using multiple keyboard controllers and multiple high speed dome camera units, one can monitor a variety of environments from small to very large.

  • Page 8: Model Numbers

    1.2 Model Numbers Model No: CDC2040MIL Micro Dome Indoor Low Speed Nylon Housing without OSD Model No: CDC2040MI-1 Micro Dome Indoor High Speed Aluminum Housing without OSD Model No: CDC2040MI Micro Dome Indoor High Speed Aluminum Housing with OSD Model No: CDC2040MO-1 Micro Dome Outdoor High Speed Aluminum Housing without OSD...

  • Page 9: Package Contents

    2.0 Installation & Configuration 2.1 Package Contents The dome carton contains the following: Description High Speed Dome mechanism Camera Module Clear Acrylic dome cover Camera shroud (black) Plastic bag W/ Screws (2xM4*10, 2xM4*3) (2xM4*6, 4xM2*4) + Mini Screwdriver O-ring + Adapter for wall or ceiling bracket 6 conductor Control/Power/Video harness 24VAC transformer 1500 mA Wall bracket...

  • Page 10: Camera Shroud Removal And Installation

    2.2 Camera Shroud removal / installation. Figure 10. Illustrates the camera shroud in position over the camera module Figure 11. Illustrates the location of the tab for the camera shroud in close position (twist On/Off) Fig. 10 Fig. 11 The CDC2040 series dome is equipped with a quick release camera liner supported by 3 tabs attached to a ring affixed to the PTZ mechanism.

  • Page 11: Communication Settings

    2.3 Communication Settings 2.3.1 Dip Switch Location. Before installation and use, the unique address for each dome and the communication protocol including transmission speed (baud rate) should be set to correspond with the chosen control system. In order to set the corresponding dip-switches remove the camera liner as previously illustrated and locate the two Dip-Switch rows (8 &...
  • Page 12 2.3.3 Address setting of each dome . To prevent damage, each dome must have a unique address (ID). Example: The sum of switch numbers in the ON position is the address of the dome device. (Binary Method) Setting address for dome device (this figure shows the address of dome device No 1).

  • Page 13: Wall Bracket Installation

    2.4 Wall bracket installation. Step 1: Feed the supplied wiring harness through the channel inside the wall bracket as illustrated in Fig. 13. Verify that the 6 pin connector is remaining outside the opening of the bracket as illustrated in Fig. 14. Fig.

  • Page 14: Attaching The Dome To The Bracket

    Note: It is important that you set the dip switch settings for the dome address, communication parameters and protocol BEFORE you install the dome in its physical location of operation. 2.5 Attaching the dome to the bracket Step 1: Locate the small plastic bag containing the O-ring, adapter, screws, and small screwdriver as illustrated.

  • Page 15: Installation Of The Acrylic Dome Cover

    2.6 Installation of the acrylic dome cover NOTE: The dome is shipped with a protective clear film around the clear bubble. This film should remain in place until you finished with the installation protecting the dome from scratches. The dome cover has two parts, a metal aluminum ring and a clear acrylic dome. The metal ring has male fine threads that will allow it to mate with the aluminum cover of the dome mechanism.

  • Page 16: Wiring Harness Specifications

    2.7 Wiring Specifications The wiring Harness has a label affixed indicating the Power, Video and Communication conductors. Do not remove this label as it may be a useful future reference. Figure 20 is the illustration of the wiring diagram for the electrical connections to the dome unit. 24V power supply Connect to control keyboard Fig.

  • Page 17: Chapter 3: Wiring And Setup

    Chapter 3: Wiring and Setup 3.1 Basic Configuration The illustration below provides the basic electrical wiring configuration for connecting and testing a single dome to a test monitor and a joystick / keyboard controller. When installing the product for the first times please read the installation instructions carefully and become familiar with the electrical connections and setup options.

  • Page 18: Connecting Multiple Domes

    3.2 Connecting Multiple Domes When connecting multiple domes together, the user has the option to connect video and control terminals to a video matrix switcher or a DVR multiplexer creating an integrated system. AC24V: Power supply Primary 110V/60H input to AC 24V output. RS-485 Bus: Control signal output from joystick controller, connected in a bus configuration to the RS485 communication terminals of the control cable for each dome.

  • Page 19: Chapter 4 - Quick Start Operation Guide

    4. Quick Start Operation Guide CAUTION: Do not turn the power ON until you have finished all connections and communication settings). 4.1 Connect the power to the dome As soon as the power is turned ON, the dome initiates a self test which includes a rotation of the dome on both axis and the camera will display a brief menu followed by a live image on the monitor.

  • Page 20: Direct Input Commands For Dome Operation

    4.5 Direct Input Commands for Dome Operation The following preset position addresses are reference to the direct memory location of the dome controller. They do not correspond to memory preset positions in the keyboard controller or software applications that support PTZ preset functions. Please consult the manual of the chosen keyboard controller for correct operation.
  • Page 21 Setting the Home position: This means the time duration before the dome positions itself to Preset No.1 during a period of inactivity. (No keyboard control) Start this function by pressing: [100] + [SHOT] + [ACK] The time interval for returning to Home (preset 1) can be set from 1-2-4-8-10 minutes by pressing: [95] + [SHOT] + [ACK] = 1 minute [96] + [SHOT] + [ACK] = 2 minute [97] + [SHOT] + [ACK] = 4 minute...

  • Page 22: Camera Osd Menu

    4.7 CAMERA OSD MENU The following section is specific to the Camera module installed in the CDC2040MIL Dome. The available options (menus and sub menus) can be accessed directly from the keyboard by entering 57+SHOT+ACK or 57 + PRESET depending the model and type of the selected keyboard controller.

  • Page 23: Chapter 5 - Program And Operation

    5. Program and Operation NOTE: The following instructions apply only to the following models with OSD (On Screen Display) functions: CDC2040MI and CDC2040MO 5.1 Main menu The following commands are references to the keyboard controlling the dome. Depending the make and model of the controller these commands may vary slightly. For reference purposes the following key labels / acronyms are used: SHOT = PRESET or PRST - ACK = ENTER - OPEN =Iris open - CLOSE = Iris Close 1.

  • Page 24: Tree Menu List

    5.2. A detailed tree of the OSD menu and sub menus is illustrated below. 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 Note: Due to space limitations not all screen shots are displayed on this page. Additional information is displayed in subsequent chapters in this instruction manual.

  • Page 25: Language Options

    5.2.1. Language Selection The default is English; Depending on the country of sale different options are available. Moving the joystick right allows the user to select different language menus. As an example the screens below illustrate the transition from English menu to Spanish. 5.2.2.
  • Page 26 5.2.2.1.2 Set Preshot Move the Dome camera to the desired position on all 3 axis (P,T,Z) and then press IRIS CLOSE button to confirm the preset position location and return to the previous menu. The menu will display “Stored” confirming that the position has been set in the dome memory.

  • Page 27: Sector Setup

    5.2.2.1.6 Name Display ON or OFF Move the joystick Left or Right to select Based on your selection the name you have entered for this preset position will be displayed (or not) on the screen when the PTZ positions itself to this preset position. Press IRIS CLOSE button to exit and return to the previous menu level.
  • Page 28 Move the joystick Left or Right to select desired character (0~~9 or A~~Z). Press IRIS OPEN button to confirm selection and move to the next character of choice. Press IRIS CLOSE button to exit or return to the previous menu level when programming is done.
  • Page 29 5.2.2.2.5 Tilt Start POSITION Move the joystick up or down to the desired selection. Move the joystick right to make your selection and display the on screen coordinates. Using the joystick move the pan & tilt to the desired Tilt Start coordinates for the selected sector. Press IRIS CLOSE button to set the Tilt Start position coordinates and return to the previous menu level.
  • Page 30 5.2.2.3 Coordinates Move the joystick up or down to the desired selection. ON or OFF Move the joystick Left or Right to select Based on your selection the On-Screen X-Y position coordinates will be displayed at the bottom of your screen. Press IRIS CLOSE button to exit and return to the previous menu level.

  • Page 31: Control Options

    5.2.3. Control Options Move the joystick up or down to the desired selection. Move the joystick right to make your selection and display the Control Options sub-menu or Press IRIS CLOSE button to return to previous menu 5.2.3.1 Set Pan & Tilt Move the joystick up or down to the desired selection.

  • Page 32: Set Default Function

    5.2.3.1.4 Tilt Reverse Move the joystick up or down to the desired selection. Move the joystick Left or Right to choose ON or OFF This allows the user to control the standby position of the PTZ. When turned ON, the PTZ will return to Home Position when it remains idle for more than 5 minutes.

  • Page 33: Speed Limit

    5.2.3.2.3 Delay The default number is 120 seconds. This is the time delay before the PTZ returns to the default position after 120 seconds of inactivity. Move the joystick Left or Right to make selection. Move the joystick left or right to position the cursor under the desired numeral and press IRIS OPEN button to move the cursor on the second numeral line (0~9).
  • Page 34 5.2.3.5 Auto Focus Move the joystick up or down to the desired selection. Move the joystick Left or Right to choose PTZ, OFF or Z These selections allow the user to control the behavior of the auto focus mechanism. PTZ = Auto Focus. The camera adjusts the focus automatically while monitoring the screen continuously.

  • Page 35: Diagnostic Options

    5.2.4 Diagnostics Move the joystick up or down to the desired selection. Move the joystick Left or Right to make selection. Different options are possible based on the function you selected including sub- menus with additional options. Press IRIS CLOSE button to exit and return to the previous menu level.

  • Page 36: Camera Options

    Move the joystick up or down to the desired selection. Move the joystick Left or Right to make selection. This selection allows the user to display the dome information regarding Dome ID number, selected communication protocol and baud rate as well as the installed firmware version. A sample of the default screen is illustrated below.
  • Page 37 5.2.6.2 Program a Vector Scan Move the joystick up or down to the desired selection. Move the joystick Left or Right to make your selection. The submenu displayed below allows the user to select up to 16 preset positions 1- 8 on the first page and 9-16 on the second page (move joystick down to access the second page) Under “name”...
  • Page 38 5.2.5 Continued from Previous Section: The following section is specific to the Camera module available options (menus and sub menus) that can also be accessed directly from the keyboard by entering 57+SHOT+ACK or 57 + PRESET depending the model and type of the selected keyboard controller. SPECIAL SPECIAL SETUP (Sub Menu) Main Setup...
  • Page 39 The following section is specific to the Special Setup Sub Menu for the SAMSUNG Camera module. SPECIAL SETUP USER PRESET ON – OFF ON – USER PRESET SETUP PRESET NO. 1-8 PRESET MODE ON-OFF ON- USER PRESET MODE SETUP FOCUS - FOCUS SETUP MODE AUTO –...
  • Page 40 SPECIAL SETUP (Cont’d) PRIVACY ON –OFF USER PRESET PRIVACY SETUP AREA SEL 1-4 AREA MODE ON -OFF MASK TONE 1-100 1-200 BOTTOM 1-200 LEFT 1-200 RIGHT 1-200 DAY/NIGHT AUTO 1-2 / COLOR – B/W H-REV ON - OFF V-REV ON - OFF PRESET SAVE PRESET CLEAR PRIVACY...

  • Page 41: Camera Options

    5.2.5 Camera Options menu Main Camera menu. Move the joystick up or down to the desired selection. Move the joystick Left or Right to make selection. Different options are possible based on the function you selected including sub- menus with additional options. 5.2.5.1 CAM TITLE The camera title options can be turned On or OFF.

  • Page 42: Motion Detection

    MANUAL: Fine tuning is possible trough this manual control mode. Select the color temperature and increase or decrease the Red and Blue values to shift the color of the object. AWC: Set up the lighting to the objects and correct the color temperature to that of a white object.
  • Page 43 5.2.5.5 FOCUS In this section you can set the focus mode. Available options are: AUTO: The camera adjusts the focus automatically while monitoring the screen continuously in the auto mode. In this mode the zoom key operation is not recognized as the input of the focus key.

  • Page 44: Image Adjust

    menu level when programming is done. 5.2.5.7 SPECIAL Under the special menu a plethora of options are available. We recommend that only experienced users with specific needs attempt to configure these options. For the majority of applications no additional settings are required from what has been described in the previous sections of this manual.
  • Page 45 5.2.5.8 RESET As a last measure, and if things get complicated, you can reset the camera to original factory settings. Move the joystick up or down to the desired selection. Press IRIS CLOSE button to reset the camera. The screen will turn black momentarily and the camera will be reset to original factory parameters.

  • Page 46: Command Reference Table

    6. Direct command entry (Short-cuts) 6.1 Keyboard direct entry command reference table Number Definition of Keyboard Operation of preset Control Object Call preset position Save preset position position [xx]+[SHOT]+[ACK] [xx]+[SHOT]+[ON] Enable system default guard Save line-scanning speed tour Pan-Tilt Control Enable Auto Pan scanning Set Start Pan Position System hold...

  • Page 47: Technical Specifications

    6.2 Technical Specifications Note: Technical specifications may change without prior notice depending on availability of components from various suppliers and or camera manufacturers.

  • Page 48: Chapter 7 - Trouble Shooting

    7. Trouble Shooting Problem Remarks Possible Reason Troubleshooting Description Cable harness is improperly Verify that the orientation of the connected or no AC power connector and the power supply input After power is Please follow the supplied Power PCB inside the dome is applied, there is no Change the power PCB basic system wiring...
  • Page 49 Trouble Shooting (Cont’d) Problem Remarks Possible Reason Troubleshooting Description Following normal If this happens frequently, operation, dome The system could not verify the This is a normal self calibration event. verify the tab alignment will rotate one start position and initiates a self No action required.

  • Page 50: Chapter 8 - Appendix Glossary

    Appendix — Glossary AREAS Programmed start and end points of the dome' s field of view around its pan axis. Each area is a part of a circular viewing area that extends around the dome. These areas can be different sizes. AUTOMATIC GAIN CONTROL (AGC) Allows for the amplification of the video signal in scenes with minimal ambient light.
  • Page 51 Setting used to improve the quality of video obtained in extreme low-light situations. When the Low Shutter setting is enabled, low-light information is collected over multiple fields based on the Shutter Limit setting. As a result, video may appear blurred or choppy in extreme low-light situations. This setting does not effect camera operation in normal lighting situations.
  • Page 52 Printed in the USA Rev. M0807415...

This manual is also suitable for:

Cdc2040miCdc2040mi-1Cdc2040moCdc2040mo-1

Table of Contents