Related Manuals for Costar Video Systems CCI2143HSB
Summary of Contents for Costar Video Systems CCI2143HSB
- Page 1 QUICK INSTALLATION GUIDE CCI2143HSB Please read this manual thoroughly before use, and keep it handy for future reference.
-
Page 2: Explanation Of Graphical Symbols
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EX- POSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). -
Page 3: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC INFORMATION: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the... -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers in- structions. - Page 5 1 Introduction The network camera supports the network service for a sensor image with progressive scan, which can be monitored on a real-time screen regardless of distances and locations. By using its dedicated program, many users are able to have an access to the network camera at once or a single user can monitor various network cameras at the same time.
-
Page 6: Installation
2 Installation 2.1 BASIC CONFIGURATION OF CAMERA SYSTEM The camera must be installed by qualified service personnel in accordance with all local and federal electrical and building codes. Camera Dimension See the diagrams below for the exact dimension of the network camera. Pinhole Camera C/CS Mount Camera ６... - Page 7 • Installing Camera ７...
- Page 8 ８...
- Page 9 ９...
- Page 10 １０...
- Page 11 １１...
- Page 12 2.2 CONNECTIONS • Connecting the Network Connect a standard RJ-45 cable to the network port of the camera. Generally a crossover cable is used for directly connection to PC, while a direct cable is used for connection to a hub. •...
-
Page 13: Resetting To The Factory Default Settings
2.3 RESETTING TO THE FACTORY DEFAULT SETTINGS To reset the network camera to the original factory settings, go to the Setup > System > Maintenance web page (described in “System > Maintenance” of User’s Manual) or use the Reset button on the network camera, as described below: •... -
Page 14: Network Connection & Ip Assignment
2.4 NETWORK CONNECTION & IP ASSIGNMENT The network camera supports the operation through the network. When a camera is first connected to the network, it is necessary to allocate an IP address to the device with the SmartManager utility on the CD. (Default IP 192.168.0.129) 1) Connect the network camera/device to the network and power up. - Page 15 １５...
- Page 16 FULL HD NETWORK CAMERA Costar Video Systems 101 Wrangler Suite 201 Coppell, Texas 75019 Phone: (469) 635-6800 Toll Free: (888) 694-7827 V:170619 １６...
Need help?
Do you have a question about the CCI2143HSB and is the answer not in the manual?
Questions and answers