HP OmniBook 7100 Service Manual page 46

Component
Pointer-control PCA
Video Heatsink
Video PCA
HP OmniBook 7100
Removal Procedures
Plug-in module (page 2-3).
Hard drive (page 2-5).
Keyboard (page 2-8).
Heatsink (page 2-9).
Display (page 2-11).
Top case (page 2-14).
Plug-in module (page 2-3).
Hard drive (page 2-5).
Keyboard (page 2-8).
Heatsink (page 2-9).
Display (page 2-11).
Top case (page 2-14).
Motherboard (page 2-15).
Plug-in module (page 2-3).
Hard drive (page 2-5).
Keyboard (page 2-8).
Heatsink (page 2-9).
Display (page 2-11).
Top case (page 2-14).
Motherboard (page 2-15).
Additional Steps (See figure on page 4-6)
Remove the screw from the PCA and unplug it from
the motherboard.
1. Unplug the PCA from the bottom of the
motherboard.
2. Remove the two screws holding the video heatsink.
Unplug the PCA from the bottom of the motherboard.
Removal and Replacement 2-25