Specifications - Greenlee 43180 Instruction Manual

Specifications

Circular Saw
Type of Hydraulic System .........................Open-center or
Hydraulic Ports
Pressure ..........................................................3/8 NPT
Return .............................................................3/8 NPT
Mass/Weight (with 9" blade) .......................... 4 kg (8.8 lb)
Length (with 9" blade) ................................. 206 cm (81")
Width (with 9" blade) .................................... 22.9 cm (9")
Blade Diameter Capacity (maximum) ........... 22.9 cm (9")
Cutting Depth (with 9" blade) ...................... 89 mm (3.5")
Revolutions per Minute
@ 15.1 l/min (4 gpm) ............................................3571
@ 18.9 l/min (5 gpm) ............................................4464
@ 22.7 l/min (6 gpm) ............................................5357
Greenlee / A Textron Company
43180 Overhead Circular Saw
Blades
closed-center
• Always use blades that meet applicable industrial
safety code specifications.
• Always use blades rated for 5400 rpm or higher.
• Blade must be installed to rotate correctly.
Refer to the Illustrations and Parts Lists and blade
manufacturer's instructions. An improperly installed
blade could result in injury.
• Inspect blades before installing and before oper-
ating. Do not use a damaged or worn blade.
A damaged blade can break and injure nearby
personnel. Destroy the blade if cracks, chips,
gouges, or loose or missing teeth are evident.
Failure to observe these warnings could result in
severe injury or death.
A 9" blade, rated at 7500 rpm, is furnished with the tool.
Replacement blades are available from Greenlee Utility
as repair parts. Contact an authorized Greenlee Utility
distributor. Any blade used with this tool must meet the
following requirements:
Blade Diameter (maximum) .......................... 22.9 cm (9")
Blade Thickness ....................................... 1.6 mm (1/16")
Arbor Hole Diameter ......................... 16.1 mm x 22.3 mm
Rated Operating rpm (minimum) .............................5400
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
(nominal)
(0.635" x 0.878")