Table of Contents
Advertisement
Scope DataPage UHF MK2 Radio Paging System
4: Serial
After pressing ENTER, the display will change to:
Enter a number in the range 1-2 to set.
After pressing ENTER, the display will change to:
The default setting of the serial port is 9600, N, 8, 1
When supplied in the standard configuration, display will read:
5: Changing the Password
Whilst at the main programming menu screen, press (
Screen will change to:
Type in current password and press ENTER.
Screen will change to:
Type in new password and press ENTER.
Screen will change to:
Re-type the new password and press ENTER.
Screen will now read:
The new password is now successfully stored.
To return to the pager entry screen press ENTER or CANCEL when at the main programming menu.
DPMK2/6
STOP BITS (1-2):
>
1
Serial Port
Set OK.
Serial Port
Not Active
ENTER PASSWORD:
?
NEW PASSWORD:
?
CONFIRM PASSW'D:
?
Password
Updated OK
***************************************
11
07/05
Advertisement
Table of Contents
