Operating; Adjusting The Volume; Temporarily Muting The Sound; Selecting An Input Signal - Hitachi CP-D27WN User Manual

Operating

Operating

Adjusting the volume

1.
Use the VOLUME +/VOLUME - buttons to adjust the volume.
A dialog will appear on the screen to aid you in adjusting the
volume. If you do not do anything, the dialog will automatically
disappear after about ten seconds.
● When is selected for current picture input port, the volume adjustment is
disabled. Please see AUDIO SOURCE item of AUDIO menu (
● Even if the projector is in the standby mode, the volume is adjustable in the
following conditions:
- An option other than
item of the AUDIO menu (
- NORMAL is selected in the STANDBY MODE item of the SETUP menu (
● In the standby mode, the volume of the microphone is adjustable with the
VOLUME +/- buttons on the remote control, in synchronization with the volume
of the projector (

Temporarily muting the sound

1.
Press MUTE button on the remote control.
A dialog will appear on the screen indicating that you have muted
the sound.
To restore the sound, press the MUTE, VOLUME + or
VOLUME - button. Even if you do not do anything, the dialog
will automatically disappear after about ten seconds.
● When is selected for current picture input port, the sound is always muted.
Please see AUDIO SOURCE item of AUDIO menu (
● C.C. (Closed Caption) is automatically activated when sound is muted and an
input signal containing C.C. is received. This function is available only when
the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER IN1
or COMPUTER IN2, and when AUTO is selected for DISPLAY in the C.C.
menu under the SCREEN menu (

Selecting an input signal

1.
Press INPUT button on the projector.
Each time you press the button, the projector
switches its input port from the current port as below.
COMPUTER IN1
VIDEO
S-VIDEO
HDMI
● While ON is selected for AUTO SEARCH item in OPTION menu (
will keep checking the ports in above order repeatedly till an input signal is detected.
● It may take several seconds to project the images from the USB TYPE B port.
(continued on next page)
is selected for STANDBY in the AUDIO SOURCE
48).
13).
COMPUTER IN2
USB TYPE B
55).
LAN
USB TYPE A
VOLUME +/- button
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
ASPECT AUTO
SEARCH
MAGNIFY FREEZE PAGE
ON
DOWN
OFF
MY BUTTON
KEYSTONE 1
48).
MUTE button
COMPUTER MY SOURCE/
VIDEO
DOC.CAMERA
ASPECT AUTO SEARCH
MAGNIFY FREEZE PAGE
UP
ON
OFF DOWN
MY BUTTON
1
KEYSTONE
48).
INPUT button
56), the projector
BLANK
VOLUME
UP
2
MUTE
46).
BLANK
VOLUME
2 MUTE
21