Adjusting The Projector's Elevator - Hitachi CP-D27WN User Manual

Adjusting the projector's elevator

The projector has Front foot for inclinations and Rear foot for horizontals. A spacer
is installed on the Rear elevator foot at the time of shipment, and the projector
is ready for use. If necessary, detach the spacer, and the elevator feet can be
manually twisted to make more precise adjustments.
Front foot
Spacer
WARNING ►Keep the spacer away from children and pets. Be careful not
to let them swallow the spacer. If swallowed consult a physician immediately for
emergency treatment.
NOTE • The Front foot can be adjusted within 0~2°, while the Rear foot can
be adjusted within -1~1°.
• After the foot is adjusted, it is possible to return it to the state of the shipment with a spacer.
It is recommended to keep the spacer and reuse it when relocating the projector.
Rear foot
0~2°
Front foot
Rear foot
11
-1~1°
Spacer