Changing The Frequency Of Remote Control Signal; Using As A Simple Pc Mouse & Keyboard - Hitachi CP-D27WN User Manual

Remote control

Changing the frequency of remote control signal

The accessory remote control has the two choices on signal
frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control
does not function properly, attempt to change the signal frequency.
In order to set the Mode, please keep pressing the combination of
two buttons listed below simultaneously for about 3 seconds.
(1) Set to Mode 1:NORMAL... VOLUME - and RESET buttons
(2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons
Please remember that the REMOTE FREQ. in the SERVICE item of
the OPTION menu (
set to the same mode as the remote control.
Using as a simple PC mouse & keyboard
The accessory remote control works as a simple mouse
and keyboard of the computer, when the projector's USB
TYPE B port and the computer's type A USB port are
connected and MOUSE is selected for the USB TYPE B
item in the OPTION menu.
(1) PAGE UP key: Press PAGE UP button.
(2) PAGE DOWN key: Press PAGE DOWN button.
(3) Mouse left button: Press ENTER button.
(4) Move pointer: Use the cursor buttons ▲, ▼, ◄ and ►.
(5) ESC key: Press ESC button.
(6) Mouse right button: Press RESET button.
►Improper use of the simple mouse & keyboard
NOTICE
function could damage your equipment. While using this
function, please connect this product only to a computer. Be
sure to check your computer's manuals before connecting this
product to the computer.
When the simple mouse & keyboard function of this product does not work
NOTE
correctly, please check the following.
• When a USB cable connects this projector with a computer having a built-in pointing
device (e.g. track ball) like a laptop PC, open BIOS setup menu, then select the external
mouse and disable the built-in pointing device, because the built-in pointing device may
have priority to this function.
• Windows XP SP3 or higher is required for this function. And also this function may not work
depending on the computer's con gurations and mouse drivers. This function can work with the
computer which can operate general USB mouse or keyboard.
• You cannot do things like press two buttons at once (for instance, pressing two buttons
at the same time to move the mouse pointer diagonally).
• This function is activated only when the projector is working properly. This function is not
available in any of the following cases:
- While the lamp is warming up. (The POWER indicator blinks in green.)
- When either USB TYPE A or USB TYPE B port is selected.
- While displaying BLANK (
- When any menu is displayed on the screen.
- While using the cursor buttons to operate the sound or screen functions such as adjusting the
sound volume, correcting the keystone, correcting the picture position and magnifying the screen.
18
62) of the projector to be controlled should be
28), TEMPLATE (
USB TYPE B
port
54) or MY IMAGE (
ASPECT AUTO SEARCH BLANK
MAGNIFY FREEZE PAGE VOLUME
UP
ON
DOWN
OFF
(2) (1)
MY BUTTON
2
KEYSTONE 1 MUTE
MENU
POSITION
ENTER
ESC RESET
VIDEO COMPUTER MY SOURCE/
DOC.CAMERA
(1)
ASPECT AUTO SEARCH BLANK
FREEZE
MAGNIFY PAGE VOLUME
UP
ON
(2)
OFF DOWN
MY BUTTON
1 2 MUTE
KEYSTONE
(3) (4)
POSITION MENU
ENTER
ESC
RESET
(6)
(5)
76) screen.