Turning On The Power - Hitachi CP-D27WN User Manual

Turning on the power

1 .
Make sure that the power cord is rmly
and correctly connected to the projector
and the outlet.
2 .
Make sure that the POWER indicator is
steady orange. Then, remove the lens
cover.
3 .
Press the STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up
and the POWER indicator will begin
blinking in green. When the power is
completely on, the indicator will stop
blinking and light in steady green.
WARNING ►A strong light is emitted when the projector's power is on. Do
not look into the lens of the projector or look inside of the projector through any
of the projector's openings.
NOTE • Please power on the projector prior to the connected devices.
• The projector has the DIRECT POWER ON function, which can make the projector
automatically turn on. For details, please see User's Manual - Operating Guide.
10
STANDBY/ON button
POWER indicator