Checking The Engine Oil Level - Clarke FG3005 Operation & Maintenance Instructions Manual

CHECKING THE ENGINE OIL LEVEL

WARNING: TO CARRY OUT THIS CHECK, PLACE THE GENERATOR ON LEVEL
GROUND WITH THE ENGINE SWITCHED OFF (O).
WARNING: TAKE CARE NOT TO TOUCH ANY HOT PARTS OF THE
GENERATOR WHEN CHECKING THE OIL LEVEL.
1. Turn the oil filler cap
counterclockwise and remove
from the oil tank,
2. Clean the dipstick with a cloth.
3. Put the dipstick back into the oil
filler tube and then remove it
again.
• Do not screw it in when doing
this.
4. If the oil is below the 'L' level on
the dipstick, fill the oil reservoir to
the 'H' level on the dipstick.
• Oil Capacity (See
"Specifications" on page 21.)
• We recommend the use of
SAE30 oil in this generator.
5. Replace the oil filler cap.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
'H' Level
'L' Level
9