Table of Contents
Advertisement
Turning the Transceiver On/Off
Note:
Out of the box the transceiver is turned "off" by default and should be turned "on" to
operate the alarm
•
To turn "on" , press and hold button #4 until the transceiver chips two times. The power is
now "on".
•
To turn "off", press and hold button #4 until the transceiver chips two time followed by
another two times. The power is now "Off".
Note:
When the Transceiver is in the "Off" mode only the
displayed
Operating Instructions
The following instruction assumes that the transceiver is with in range of the motorcycle.
Arm
1.
Press button #1, siren chirps 3 times and the turn signal lights flash 1 time.
2.
The Transceiver echoes 3 chirps and the LCD displays
Disarm
1.
Press button #2, siren chirps 1 time and lights flash 1 time.
2.
The Transceiver echoes 1 chirp and the LCD displays
Arming With Optional Perimeter Sensor
1.
Press button #3, siren chirps 4 times and turn signal lights flash 1 time.
2.
The Transceiver echoes 4 chirps and the LCD displays
3.
The system is armed and the perimeter sensor is activated.
Arming Without Siren / Paging Only
1.
Press buttons #1 and #3 at the same time, siren chirps 5 times and the turn signal lights
flash 1 time.
2.
The Transceiver echoes 5 chirps and the LCD displays
3.
The system is armed but the siren and turn signal lights are disabled for a silent paging
only alert.
Arming Without Siren or Perimeter Sensor (optional) / Paging Only
1.
Press buttons #2 and #3 at the same time, siren chirps 6 times and the turn signal lights
flash 1 time.
2.
The Transceiver echoes 6 chirps and the LCD displays
3.
The system is armed but the siren, turn signal lights and perimeter sensor are disabled.
Panic/ Stop Trigger
a.
When system is armed press button #3 for Panic feature. (panic feature will
sound siren for a few seconds, drawing attention to your bike)
b.
Pressing button #3 during an alarm trigger stops the alarm cycle but keeps
the system armed.
Note:
When pressing button #1,2 or 3 the
sent.
and
icon will flash to confirm the command has been
6
icons will still be
and
and PER OFF icons.
icon.
,
icons.
,
and
icons.
, ,
and PER OFF icons.
Advertisement
Table of Contents
