User's Guide; Remote Transceiver Icons And Message Display; Turning Transceiver On / Off - Scorpio SR-i500 Installation Manual And User's Manual

User's Guide

Remote Transceiver Icons and Message Displays
System Disarmed
Alert Type Aud/Vibr
Signal Indicator
Button # 4
Shock Trigger
Perimeter Trigger
Alarm Clock
Clock
Button #1
Button #3
Turning the Transceiver On/Off
Note: Out of the box the transceiver does not have the battery installed, please install battery to
operate transceiver.
• To turn "on" , press and hold button #4 until the transceiver chips two times. The power is
now "on".
• To turn "off", press and hold button #4 until the transceiver chips two time followed by
another two times. The power is now "Off".
Note: When the Transceiver is in the "Off" mode only the
displayed
3. Press button 4
repeatedly to
scroll though the
programmable
icons
and
5
System Armed
Silent Paging Only Arming
Battery Level Indicator
Ignition Trigger
Tilt Trigger
Back up Power Activated
Cycle Low Battery Indicator
Button #2
icons will still be