User's Guide; Transceiver Charging Instructions; Transceiver Battery Status; Motorcycle Battery Status - Scorpio MotoSecure SR-i900 Series User Manual

User's Guide

Alert Type
Aud/Vibr
Range
Indicator
Button 1
Reset
Button
Shock
Trigger
Button 2
Audible/
Silent
Alert Indicator
24 hour
Clock / Text
display
Charger Input
7
Charging Instructions
We recommend that the transceiver be charged
for up to 12 hours to insure full life of the battery.
1. Plug in provided charger into the transceiver.
2. While the transceiver is charging the
System Status
icon will scroll from empty to full.
3. When the transceiver is fully charged the
Battery
icon will no longer scroll.
It's recommended to recharge the transceiver
every day to maintain full function.
Tilt Trigger
Remote Battery Status
Ignition
Trigger
The LCD will display 3 different icons to
show the transceiver battery status.
Perimeter
Trigger

Motorcycle Battery Status

Every time the alarm is activated or deactivated,
Back up
the LCD will display a text message with the
Power
current battery voltage.
Trigger
If motorcycle battery drops below 11 volts the
screen will display CyCLE bAtt LO.

Transceiver Back light

From the main screen pres button 1or 2, the
screen back light will turn on for 2 seconds.
Back-up Battery (BAT-5)
The back-up battery provides the system the ability to transmit information and activate the siren
when power is interrupted. If power is ever interrupted while the system is activated the back-up
battery will be engaged. The transceiver will receive a
second increments. If power is not restored the alarm will continue to transmit and sound for six
cycles.
Note: The system has to be correctly installed for at least 12 hours before full function of the
back-up battery can be used.
To check the status of the back-up battery, activate the system using button 1.
• If the system chirps 3 times the back-up battery is in good working condition
• If the system chirps 2 times the back-up battery is not fully charged or not installed.
Note: If power is purposely being interrupted when the alarm is activated, turn ignition key
on and off before disconnecting power to limit the back-up to two cycles instead of
six.
Note: If the system chirps only 2 times and it has been correctly connected for more the 12
hours, the battery needs replacement. (Contact Aritronix for replacement options)
trigger and the siren will sound in 30
20