Screen Menu - Hitachi PJ-TX10W User Manual

Multifunctional Settings (continued)

SCREEN Menu

With the SCREEN menu, the items shown in the table below can be
performed.
Perform each operation in accordance with the instructions in the
table below.
Item
Select a Blank Screen Color:
BLANK • The blank screen of selected color is displayed by pressing the BLANK
Select the Start Up Screen:
START UP
• If the TURN ON is selected when there is no signal or the detected signal is
Adjust a Menu Position:
Pressing the
MENU POSITION Left
• The
previous display, please press the ESC button.
Select the Message Mode:
• When the TURN OFF is selected, the following message functions are
MESSAGE
Reset the SCREEN Menu Items:
Selecting the EXECUTE performs this function.
RESET
• The items of the SCREEN menu are collectively returned to the initial setting.
BLUE WHITE
button. Please refer to the section "Temporarily Blanking The Screen" of
"Operating" about the screen blanking.
TURN ON
out of specifications, the blank screen is displayed.
or ENTER button start adjusting,
Up
Right
Down
button does not finish this item. When you want to return to the
TURN ON
disabled:
The message of "AUTO IN PROGRESS"
The message of "NO INPUT IS DETECTED"
The message of "SYNC IS OUT OF RANGE"
The message while being searched for an input signal, "Searching ....."
The message when an input signal is detected, "Detecting ....."
The indication of the input signal by input change.
EXECUTE CANCEL
Description
BLACK
TURN OFF
TURN OFF
MENU
MAIN
BLANK BLACK
PICTURE-1 START UP
TURN ON
PICTURE-2 MENU POSITION
INPUT
MESSAGE TURN ON
AUTO
RESET
SCREEN
OPTION
: SELECT
29