Connecting Power Supply - Hitachi PJ-TX10W User Manual

Setting Up (continued)

Connecting Power Supply

WARNING • Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in FIRE and/or ELECTRICAL SHOCK. Please
adhere to the "User's manual – Safety Guide" and the following.
• Only plug the power cord into outlets rated for use with the power cord's specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
Connect the connector of the
1
power cord to the AC inlet of the
projector.
Firmly plug the power cord's plug
2
into the outlet.
AC Inlet
Connector Side
Power cord
11