Using The Automatic Adjustment Feature; Correcting Keystone Distortions - Hitachi PJ-TX10W User Manual

Operating (continued)

Using The Automatic Adjustment Feature

ON
SEARCH OFF
SRC
VIDEO S-VIDEO COMPONENT
V SV C
COMPUTER VOLUME
PC
AUTO WIDE BLANK
MUTE
AT WID
CINEMA DYNAMIC NORMAL CUSTOM
CIN DYN NOR CUS
MYMEMORY
M1 M2 M3 M4
KEYSTONE
MENU
ENTER
ENT
ESC RESET
E
NOTE
• The automatic adjustment operation requires approximately 10 seconds.
Also, please note that it may not function correctly with some input.

Correcting Keystone Distortions

SRC
VIDEO S-VIDEO COMPONENT
V SV C
COMPUTER VOLUME
PC
AUTO WIDE BLANK MUTE
AT WID
CINEMA DYNAMIC NORMAL
CUSTOM
CIN DYN NOR CUS
MYMEMORY
M1 M2 M3 M4
KEYSTONE
MENU
ENTER
ENT
ESC RESET
E
NOTE
• When the WIDE is selected under the ASPECT item of the MAIN menu, this
adjustment is ignored.
• The correcting keystone distortions function may not be work well with some types of
input signals.
• The adjustable range for correcting keystone distortions will vary with the type of
input signal.
18
Press the AUTO button.
1
Automatic Adjustment for RGB Input
Horizontal position (H POSITION), vertical position (V POSITION),
clock phase (H PHASE) and horizontal size (H SIZE) are
automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. Dark pictures may still be
incorrectly adjusted. Use a bright screen when adjusting.
Automatic Adjustment for Video Input
The signal type best suited for the respective input signal is
selected automatically.
This feature is available only if VIDEO is set to AUTO in the INPUT
menu.
Press the KEYSTONE button.
1
As illustrated on the right, a dialog will appear on
the screen to aid you in correcting the distortion.
Use the
2
Press the KEYSTONE button again to close the dialog
and complete this operation. (Even if you don't do
anything, the dialog will automatically disappear after
a few seconds.)
,
buttons to correct distortion.
AUTO
KEYSTONE
KEYSTONE
+0