Troubleshooting; General Use - Panasonic KX-NT700 Operating Instructions Manual

Troubleshooting

Troubleshooting
Troubleshooting
If you are experiencing trouble, refer to the information in this section. Before troubleshooting, confirm all
connections (see page 23) and confirm that the AC outlet or PoE device to which the unit is connected to is
receiving power.

General Use

Issue
The display is blank.
The unit is not performing
properly.
64 Operating Instructions
Possible Cause & Solution
•
The unit is not receiving power.
→
The unit is not designed to function when there is a power
failure. Make sure that the unit is connected to the AC
outlet and receiving power. If using PoE, confirm that the
device supplying PoE is receiving power and that the LAN
cable is properly connected.
•
Cables or cords are not connected properly.
→
Check all connections.
•
An error has occurred.
→
Reset the unit. Disconnect the unit from the AC outlet, wait
10 seconds, then connect the AC adaptor again. If using
PoE, disconnect the LAN cable, wait 10 seconds, then
connect the LAN cable again.
Reference
page 23
page 23
page 23
Document Version 2010/02