Firmware Settings - Primare PRE60 User Manual

•
Turn the SELECTOR control on the front panel, or the
< or > buttons on the remote control, to highlight the
first letter.
•
Press the R button on the front panel, or the SELECT
button on the remote control, to select it:
Wlan settings vol 22
N O P Q R S T U V W X
N O P Q R S
•
Repeat for the remaining letters.
•
Press the button on the front panel twice to return
to the Network settings menu.
•
Select Apply settings.
•
Select Ok to the prompt Will reset module.
The menu should show Connected Wireless:
Network settings vol 22
Ethernet settings
Wlan settings
Name PRE60
Connected Wireless
1

fiRmwARE SEttinGS

The Firmware settings menu allows you to install
updated firmware in the PRE60.
When you switch the PRE60 on from standby it will
automatically check for new firmware and show a
message in the Primare App if it is available.
To update the firmware
•
Turn the SELECTOR control on the front panel, or
press the A or V buttons on the remote control, until
the Firmware settings item is highlighted on the main
menu:
Device settings vol 22
Audio settings
General settings
Network settings
Firmware settings
•
Press the R button on the front panel, or the SELECT
button on the remote control.
The PRE60 will then scan for firmware on the network.
If the firmware on your PRE60 is up to date the menu will
show Version is up to date:
Firmware settings vol 22
Back
Source Server
Current ver: 0.53
Version is up to date
For more information about updating the firmware see
the Primare Web site.
PRE60 Audiophile Preamplifier, dAC, Streamer user Guide