Configuring Network Settings; Ethernet Settings; Wlan Settings - Primare PRE60 User Manual

ConfiGuRinG nEtwoRk SEttinGS

The Network settings menu allows you to configure the
options on the Ethernet settings or WLAN settings menu,
to connect the PRE60 to an Ethernet network.
To display the Network settings menu
•
Hold down the @ button on the front panel, or press
and hold the MENU button on the remote control.
The main menus are displayed.
•
Turn the SELECTOR control on the front panel, or
press the A or V buttons on the remote control, until
the Firmware settings item is highlighted on the main
menu:
Device settings vol 22
Input settings
Audio settings
General settings
Network settings
•
Press the R button on the front panel, or the SELECT
button on the remote control.
The Network settings menu provides the following
submenus:
Menu Description

Ethernet settings

Allows you to configure the settings
for a wired connection.

Wlan settings

Allows you to configure the settings
for a wireless connection.
Name Allows you to give a name to the
PRE60 on the network.
Apply settings Applies the settings you've
configured in the other menus.
Below the menu items the menu shows the current
network status; for example:
Network settings vol 22
Ethernet settings
Wlan settings
Name PRE60
Network disconnected
PRE60 Audiophile Preamplifier, dAC, Streamer user Guide
EthERnEt SEttinGS
To connect the PRE60 to an Ethernet network you need to
configure the settings on the Ethernet settings menu.
Ethernet settings vol22
DHCP enabled
IP 0.0.0.0
IP Mask 255.0.0.0
Gateway 0.0.0.0
To use DHCP
If your network supports DHCP this is the recommended
way of connecting to Ethernet, as the other settings are
configured automatically for you.
Ethernet settings vol22
DHCP enabled
IP 0.0.0.0
IP Mask 255.0.0.0
Gateway 0.0.0.0
•
Change DHCP to Enabled.
•
Select Apply settings.
•
Select Ok to the prompt Will reset module.
The menu should show Connected Wired.
To set up Ethernet manually
This option is only recommended for experienced users.
•
Configure the DHCP option on the Ethernet settings
menu to disabled.
The following table explains the remaining options:
Item Description
IP The IP address assigned to the PRE60.
IP Mask The IP mask.
Gateway The gateway or router IP address.
Proxy Set to Enabled to use a proxy server.
Proxy server The IP address of a proxy server.
Proxy port The port to use for the proxy.
DNS1 The address of the DNS servers.
DNS2 The address of an optional second DNS
server.
wlAn SEttinGS
If you have a WLAN (Wi-Fi) network, the simplest way to
connect the PRE60 to the Internet is via WLAN.
Wlan settings vol22
Scan
SSID Primare 2.4GHz
Security WPA2
IBSS False
To scan for WLAN networks
•
Highlight Scan on the Wlan settings menu.
•
Press the R button on the front panel, or the SELECT
button on the remote control.
The menu shows a list of accessible WLAN networks:
Network scan vol22
Home
Office
Othernetwork1
Othernetwork2
•
Highlight the network you want to use.
•
Press the R button on the front panel, or the SELECT
button on the remote control.
The network name will be displayed in the SSID option:
Wlan settings vol22
Scan
SSID Home
Security WPA2
IBSS False
To enter the network password
•
Highlight Passphrase on the Wlan settings menu.
•
Press the R button on the front panel, or the SELECT
button on the remote control.
The passphrase editor is displayed:
Wlan settings vol 22
5 6 7 8 9 A B C D E F
7 8 9 A B
1