Table of Contents
Advertisement
C O NF I G U R I NG T HE SETTINGS
Using the settings menus
You can view and change the I35 settings from the front
panel, remote control, or using the Prisma app.
to display the settings menu
Press the @ button on the front panel, or the menU
l
button on the remote control.
The settings menu is displayed:
I35 SETTINGS
INPUT
AUDIO
GENERAL
to step between settings
Turn the SeleCtOr control on the front panel, or press
l
the A or V buttons on the remote control.
The current setting is shown highlighted.
to change a setting
Press the R button on the front panel, or the SeleCt
l
button on the remote control.
The current value is shown highlighted.
Turn the SeleCtOr control on the front panel, or press
l
the A or V buttons on the remote control, to change
the value of the setting.
As you change it the new value is shown in the menu.
Press the
R button on the front panel, or
l
button on the remote control, to save the value you
have set.
to navigate back or cancel editing a setting
Press the
button on the front panel or remote
l
control.
to exit from the settings menu
Press the
button on the front panel, or the menU
l
@
button on the remote control.
1
InpUt SettIngS
The InpUt SettIngS menu allows you to customise the
inputs to suit the sources in your system:
A1 SETTINGS
INPUT
ALIAS
STATUS
InpUt
Initially the InpUt SettIngS shows the settings for the
0
currently selected input. Alternatively the InpUt option
allows you to step between all the inputs. The subsequent
options will change according to the input.
AlIAS
Allows you to give the source a name; eg rADIO.
Highlight the AlIAS item, then press the SeleCt button
l
on the remote control.
The renAme InpUt menu is displayed:
RENAME INPUT
Turn the SeleCtOr control on the front panel, or press
l
the < or > buttons on the remote control, to select the
first letter.
Press the R button on the front panel, or the SeleCt
l
the SeleCt
button on the remote control, to select it.
After adding each character you have the options:
ADD neW CHArACter
where COnfIrm shows the alias you have entered so far.
Select ADD neW CHArACter to add the remaining
l
letters, up to a maximum of six characters.
Select COnfIrm when you have entered the alias you
l
want.
0
A1
A1
ENABLED
0
A
COnfIrm 'A'
CleAr AlIAS
StAtUS
Choose between enABleD (default) or DISABleD to
specify whether the input is enabled.
AUtO SenSe
Choose between: SeleCt to automatically select an input
containing an audio signal if the I35 is on; WAKe+SeleCt
to automatically wake up the I35 from standby, if
necessary, and select an input containing an audio signal;
and Off (default) to disable automatic switching.
VOlUme
Choose between VArIABle (default) or fIXeD to specify
whether the input should have variable or fixed gain.
fIXeD is 0dB gain, equivalent to volume setting 66, and
will overrule mAXImUm VOlUme in AUDIO SettIngS.
Selecting fIXeD will show a loud-volume warning. Select
YeS to proceed or nO to cancel the fixed gain setting.
Fixed gain functions as an SSP (Surround Sound Pass-
through) allowing the I35 to be used as an amplifier in a
multi-channel system setup
InpUt gAIn
Choose between: -30dB to -1dB, 0dB (default), or +1dB to
+30dB to set the gain for the selected input.
If the gain is set too high on an input clipping may occur,
and the message:
DeCreASe InpUt gAIn
will be displayed. In this case reduce the gain until the
warning message is not displayed.
I35 DAC Integrated Amplifier User Guide
Advertisement
Table of Contents
