INDEX Read all instructions carefully before setting up and operating the unit, and please keep this instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to follow these instructions may damage and/or impair its operation and void the warranty.
THANK YOU THANK YOU! Congratulations on your purchase of this versatile Honeywell Evaporative Air Cooler. For optimum cooling performance from your unit, fill the water tank with water & ice (if available) to increase its cooling power. Please read these instructions carefully.
USER TIPS COOL ~ EFFICIENT ~ NATURAL Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. This breeze drops the temperature and has a relaxing cooling effect. The evaporative air cooler cools the air by means of the evaporation of water. When water evaporates into the air, the result is a mixture of air and water molecules.
USER TIPS The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when the humidity is low. The evaporative air cooler must be kept at floor level and there must be water in the water tank.
SAFETY RULES READ AND SAVE THESE INSTRUCTIONS: When using electrical appliances, basic safety precautions should always be followed: • Your cooler runs on 220-240 Volt AC, 50 Hz current. Check the household voltage to ensure it matches the appliance's 220-240 Volt, 50 Hz rate specification.
SAFETY RULES • DO NOT attempt to repair or adjust any electrical or mechanical functions of the cooler, as this may void the warranty. DO NOT cover the air inlet or outlet on the appliance as this • may cause motor damage. DO NOT insert or allow objects to enter any ventilation or •...
PARTS DESCRIPTION 1. Control Panel 8. Water Level Indicator 2. Outlet Louvers 9. Can Holders 3. Front Pad Cover 10. Top Storage Compartment 4. Casters 11. Rear Pad Cover 5. Wheels 12. Cord Wrap 6. Water Fill Door 13. Overflow Hole 7.
USE & OPERATION CONTROL PANEL FUNCTIONS SPEED COOL TIMER SWING POWER TIMER : Press the ''TIMER'' button until the indicator light comes on to your desired timer. Once the set time has passed, the unit will automatically shut off. The Timer function allows you to program the unit for 0.5 to 8 hours OFF timer.
USE & OPERATION SPEED: Touch SPEED to change fan speed between HIGH and LOW as displayed in incremental bars HIGH and LOW. COOL: To use the unit as an evaporative cooler, touch COOL on the touchsreen panel. The pump will turn on and distribute water to wet out the cooling pad.
USE & OPERATION FILL WATER ( Continuous Water Supply Connection) • Connect a garden hose to the hose adapter securely. Make sure hose adapter seal washer is evenly set inside the adapter. • Connect water supply to the garden hose, and turn on water supply.
USE & OPERATION LOW WATER ALARM FUNCTION The unit is equipped with a low water sensor. When water in the tank is below the minimum level, you will hear 10 beeps and the COOL LED indicator will flash continuously. At the same time the power to the pump inside the unit will be cut off to protect the life of the pump.
USE & OPERATION REMOTE CONTROL Remote Control POWER - Turn power on/off SPEED - LOW/HIGH COOL - Turn the pump/COOL function on SWING - Automatic swing of louvers TIMER - Timer function of 0.5 to 8 hours NOTE: Under direct sunlight, effective remote control range will be reduced. NOTE Batteries not included in the package.
USE & OPERATION OPERATING THE UNIT • Fill the tank manually or after hose connection is made, turn on the water supply to the cooler. • The hose connection to the float valve provides an automatic method of refilling the water supply as water is evaporated.Whenever possible operate the blower fan at low speed for maximum cooling.
CLEANING & MAINTENANCE WARNING Before cleaning the unit, switch it to the ''OFF'' position and • remove the plug from the power socket. To clean the outside, use a damp cloth to remove dirt and • dust. Never use detergents, corrosive elements or any chemicals •...
CLEANING & MAINTENANCE CLEANING THE FILTER The unit includes honeycomb pads, located in the front and rear of the unit. The frequency of cleaning the model depends on local air and water conditions. In areas where the mineral screw content of the water is high, deposits may build up and restrict air flow.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air Cord is not plugged in. Make sure power cord is plugged in and the supply switch in ON. Power is not on. Try to turn the unit ON by pressing buttons on control panel or remote control.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The unit does not respond Remote control batteries. Check batteries, Replace if needed. Try to operate using the control panel. Damaged PCB Try with remote control. If the unit responds, PCB board fasteners may be loose. Contact service centre.
TECHNICAL SPECIFICATIONS MODEL NO. CO301PC Voltage 220-240V 50Hz Frequency Wattage 270 Watts Water Tank Capacity 30 Litre Cooling Media Honeycomb Product Dimension 546 (L) x 437 (W) x 1082 (H) mm 30 Kg Net Weight 1.2/2.2 A Current ELECTRICAL WIRING DIAGRAM...