Honeywell CR10A Features

Quality Air Control For Quality Air Control For
Your Home and You Your Home and You
What You Can't See Can Hurt You
99% of airborne particles are invisible to the naked eye. That includes
bacteria, molds, fungi, pet dander, tobacco smoke and other pollutants.
Particulates smaller than 1 micron in size are most important to
capture because they make up 99% of the number of particles
in your air and can be inhaled deep into the lungs. Typical
household particles can be from .001 to 100 microns in size
(the human hair is approximately 70 microns).
Your air quality system is designed to capture most airborne particles
before they recirculate into the air. Therefore, the more particles the system
can trap, the more efficiently the system can clean the air. That's where
Honeywell Filters with new filtration technology can help.
Typical Household Particles
Pollen
Dust Particles
Pet Dander
Mold Spores/Fungi
Bacteria
Smoke
0.01 0.1 1.0 10
Particle Size (measured in microns)
Invisible Visible
69-1647
Filtering What You Can't See
Based on independent laboratory tests of leading brands, this Honeywell
Filter offers one of the highest efficiency ratings in capturing particles
between 0.3 and 1 micron in size from air passing through the filter.
Particles captured include bacteria, smoke, mold spores and other fungi.
Filtering What You Can See
Tests confirm that this Honeywell Filter provides a very high performance
rating in capturing particles between 3 and 10 microns in size from air
passing through the filter. Particles between 3 and 10 microns are classified
as E3 particles by ASHRAE.
Particles captured include pet dander, pollen and dust.
Doesn't Support Mold Growth
The filtration material in this Honeywell Filter will not support the growth of
bacteria, mold, mildew or fungi in normal use.
Better Air Flow
With Honeywell Filters, outstanding filtration performance doesn't come at
the expense of restricting air flow through your system. When changed
regularly, Honeywell Filters are designed to operate within the performance
parameters for today's heating and air conditioning systems.
Designed To Last Up To 3 Months
Typically, Honeywell Filters should be changed at every 3 months, however,
some homes may require more frequent changes.
100
CONTACT US: Visit our website at:
www.honeywell.com/yourhome/
Honeywell • 1985 Douglas Drive • Golden Valley, MN 55422
08/02
Process CMYK
PANTONE 485
09/06/02
Date:
Creator: The GEM Group,
7300 Metro Blvd., Edina, MN 55439
Ph (952) 831-6313 – Fax (952) 831-6529
Honeywell 1" Air Filter for Target
Job Name:
XX0000.00 Honeywell Job #
xx 000 Model #
XX0000.00 Reference #
Die Size: 00w x 00h Document Size:
Die Number: 000 000
DIELINE DOES NOT PRINT
KEYLINE CREATED AT: 100%
Ultra Performance
Ultra Performance
Furnace Filter
Furnace Filter
Ultra Performance
Furnace Filter
Enhances indoor air quality.
Captures allergens like pollen, dust
and pet dander from the air passing
through the filter.
Controls microscopic allergens like
smoke, mold spores and fungi, plus
airborne bacteria.
Enhances furnace efficiency and
better air flow through your system.
LASTS UP TO 3 MONTHS
See back for details
APPROVALS
___
UPC
___
CREATIVE
___
COPY
___
DIELINE
___
OK
___
OK W/CHANGES AS
MARKED, NEED TO SEE
ANOTHER PROOF
___
READY FOR PRE-PRESS
24w x 20h ___
READY FOR ROUND TABLE
109-02755
OUTPUT AT: 55%
The Most Trusted Name The Most Trusted Name The Most Trusted Name
in Home Comfort Control in Home Comfort Control
in Home Comfort Control
69-1647