Configuration; Web-Based Configuration Utility - D-Link DWR-921 User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link mobile router using the web-based configuration utility.

Web-based Configuration Utility

To access the configuration utility, open a web browser such as Internet Explorer and enter
the IP address of the router (192.168.0.1 by default).
To log in to the configuration utility, enter admin as the username, and then enter the password.
By default, the password is blank.
If you get a Page Cannot be Displayed error, please refer to "Troubleshooting" on page 77 for
assistance.
The configuration utility will open to the STATUS > DEVICE INFO page. You can view different
configuration pages by clicking on the categories at the top of the screen (SETUP/ADVANCED/
TOOLS/STATUS/SUPPORT), and then selecting a configuration page from the bar on the left side.
The following pages will describe each section in detail, starting with the SETUP pages.
D-Link DWR-921 User Manual 8