Table of Contents
Advertisement
Playback Operation
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING
YOUR DVD PLAYER FOR THE FIRST TIME.
WARNING: Do not play poor-quality discs to avoid damaging the lens.
Pre-operation
1.
Connect the unit to power supply through the provided AC adaptor.
2.
Switch "POWER ON/OFF" to "ON" on the left panel to turn on the DVD player. The
main unit power indicator turns green and screen displays the company's logo.
3.
Push the OPEN button to open disc cover, put a disc in the disc tray with printed
side facing up, and then close the disc cover. (See the figure below)
4.
The player will search disc and play it automatically.
5.
Adjust the volume with VOLUME control on the right panel to proper level.
6.
Press the PWR button on the remote control to set the player in standby mode, the
main unit power indicator lights red.
Using of Some General Buttons
MODE Button
Press MODE button to change the level of
brightness, contrast and color. Please adjust these
items with + and – buttons.
Press it for 1~2 seconds to change the aspect ratio
between 16:9 and 4:3 and overturn the screen.
See the below figure for details:
23
Advertisement
Table of Contents
