TECH LUX TL107004 Operating Manual page 44

PROBLEM
There is no picture.
The remote control
does not work
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, please unplug the power-supply cord and then plug it into the
outlet again to reset the player. If the problems still exist, please cut off the power supply
and consult your service center or the qualified technician.
POSSIBLE CAUSE
The LCD may be off or not
be in correct video mode.
The system connection may
be not correct.
The unit may be not in AV
out mode.
There may be
obstructions between the
remote control and
player.
The remote control may not
be pointed at the player.
The batteries of remote
control may not be inserted
correctly.
The batteries of remote
control may be out of power
or weak.
44
Troubleshooting
POSSIBLE SOLUTION
Turn on the LCD and choose
the correct video mode.
Connect
correctly.
Switch AV tab on the bottom
of the unit to out.
some
Remove
between the remote control
the
and the player.
Point the remote control at
the player directly.
Make sure the polarity of
each battery is correct.
Replace the batteries.
the system
the obstruction