Table of Contents
Advertisement
Battery Installation Steps
With the remote control unit placed on a flat surface and follow the steps below to install
the battery.
Step 1: Pull the battery holder out from the remote
control in the direction of the arrow.
Step 2: Load a new battery properly with
its (+) sided up.
Step 3: Insert the battery holder back into
remote control
Battery Property
Battery Type: CR2025 3V
Battery service Life: Approximately 1 year under normal use (at room temperature).
Using of Remote Control
1.
For best results, aim the remote control directly at the player's receiving window
within the range of 15 feet and angles of 60 degree, and without obstacles between
remote control and remote sensor.
2.
Improper use of the battery may cause overheating, and explosion or ignition,
resulting in an injury or a fire. Battery leakage may damage the product.
3.
Do not expose the remote control unit to direct sunlight.
4.
Do not recharge, disassemble, deform or heat the battery.
5.
Do not put the battery in fire or water.
6.
Immediately replace used up battery.
Remote Control
14
Advertisement
Table of Contents
