Basic Operation - TECH LUX DUO 2 TL107003 Instruction Manual

Basic Operation

Playing disc of DVD, MPEG4, SVCD, VCD, CD, MP3
1. Connect the unit to the power;
2. Open the unit and adjust the monitor to the best position for viewing.
3. Turn on the unit by sliding the ON/OFF switch to ON, the source menu will be
displayed on the screen:
Press [ ] to enter DVD mode or Media mode and press OK to confirm.
When selecting media, ensure to insert USB or SD/MMC card properly.
4. Open the disc door and insert a disc into the door.
5. Close the disc door. The unit will load the disc and start playing.
6. Press [ ] once to stop playback; then press[
from the point where you stopped; press[
completely.
7. When the playing is finished, please turn off the power by sliding
ON/OFF switch to OFF.
Pause during playback
During playback, press [
press it again to resume playback.
Note:
When at pause, stop or no disc status, after about
3 minutes the unit will be protected;
Press any button to exit.
Play DVD disc with Title or Chapter Menu
For some DVD disc with Title or menu,
press MENU button to enter menu page,
and use direction button to select.
Press ENTER to confirm.
DVD
MEDIA
] to resume playback
] twice to stop playback
] to pause;
Play/Pause
Title
Cursor button
Enter
- 7 -
Menu