General Setup Page (continued)
System Setup
2.Angle Mark
This item is used to turn the Angle Mark on or off.
Press the or button to highlight this item.
Press the ENTER/ENT or to enter the item.
Press the or button to choose angle mark on
or off.
Press the ENTER/ENT button to confirm your
selection. Press the direction to exit this item.
3.OSD Language
This item is used to set the OSD (on -screen
display) language. Press the or button to
highlight this item. Press the ENTER/ENT or to
enter the setup of this item.
It includes English, French, Spanish, German and
Italian.
Press the or button to choose the proper one.
Press the ENTER/ENT button to confirm selection.
Press the direction button to exit this item.
4. Spdif output
This item is used to set the format of digital audio.
Press the or button to highlight this item.
Press the ENT or button to access.
Spdif /Raw outputs a digital signal.
Spdif /Pcm outputs a pulse code modulation signal.
Press the or button to choose the proper one.
Press the ENT button to confirm your selection.
Press the button to exit.
5. Captions
This item is used to set the Captions on or off.
Press the or button to highlight this item.
Press the ENTER/ENT or button to access .
Press the or button to choose On or Off.
Press the ENTER/ENT button to confirm your
selection.
Press button to exit.
36