Power Supply Preparation - TECH LUX TL107004 Operating Manual

Using of AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery.
1. Connect AC adapter to the right side
of the DVD player in the jack marked
DC 12V IN (as the right figure).
2. Plug the two-prong end of the power
cord into a grounded electrical socket.
The power indicator lights red.
Note: Turn player's power off before unplugging.
Note: When using the adapter, the LCD screen will be brighter than with the
rechargeable battery.
Using of Car Adapter
The player is supplied with a Car Adapter for powering the unit and charging the battery
while in a vehicle.
Connect the Car Adapter Power Plug to
the unit's power jack and plug the other
end to the Vehicle's 12V accessory/
cigarette lighter socket, as shown in the
right figure.
Attention

Do not operate the unit or view video software while driving a vehicle.

Place the unit in a proper position for viewing.

Please detach battery pack when using car adapter as power source.

Disconnect the player from the Cigarette Lighter when starting the vehicle.
Power Supply
Preparation
18