Viper 5601 Installation Manual page 51

stays on for 10 minutes.
Note:
When the defogger mode is on, the output is always active and can
be turned on independently with the remote for a one-time activation. (See the
Remote Functions table.)
3-12 Parking Lights:
parking lights (if connected) comes on solid during the remote start runtime. In
the two- flash setting the parking lights flashes during the remote start runtime. In
the OFF setting, the parking lights do not come ON or flash, when the vehicle
is remote started.
3-13 Anti-Grind:
On (1) OFF (2)
when-armed output is active during remote start operation. This activates the
starter kill relay and prevents the customer from re-cranking the car with the key,
when doing key takeover. If accessories such as a voice module or window
module are added to the unit, it may be necessary to use the two-chirp setting
to program this feature OFF.
3-14 Tach Mode Starter Release:
two-chirp setting to increase time by 15% of the original tach programmed time.
Use the three chirp setting to decrease by 15% of the original programmed
time.
3-15 Vehicle temperature auto report:
OFF. When programmed ON the main unit stores the interior temperature of the
vehicle in its temporary memory. When the vehicle's interior temperature chang-
es 1 degree Celsius, the main unit automatically sends the interior temperature
message to the remote and the LED's light up accordingly to display the current
temperature (See Owner's Guide for temperature description).
Note:
Only available when upgrading to a two way remote
© 2008 Directed Electronics. All rights reserved.
Constant (1) Flashing (2) OFF (3)
:
With the anti-grind On (default) the ground-
Normal (1) Increase (2) Decrease (3): Use the
ON (1) or OFF (2). The default setting is
:
In the default setting, the
51